PreSonus Temblor T8 Studio Subwoofer
A solid foundation for mixing.
A subwoofer provides the extra-deep low frequencies you need when mixing on relatively small monitors, especially for music that requires serious low-end punch. Powerful and musical, Temblor® T8 active, downward-firing subwoofers are designed to deliver fast and accurate transient response, extending low frequencies without a hint of “tubbiness” or overshoot. This ensures that Temblor-series subwoofers complement full-range monitors without overshadowing them, naturally extending the reach of your full-range system’s low end so that you can produce your best mix from top to bottom.
Features
Main components 8-inch, downward-firing, glass-composite low-frequency transducer Round, front-firing, bass-reflex acoustic port Controls and filters Input gain control (-30 dB to +6 dB, continuously variable) Continuously variable lowpass filter (50 Hz to 130 Hz) Built-in crossover Switchable highpass filter removes frequency content below 80 Hz from the full-range signal sent from the Temblor outputs to the main monitors Polarity invert Power and safety 200 watt, Class AB amplification Internal damping and heat sink Integrated rubber feet for stable placement Inputs and outputs Left and right, balanced ¼” TRS and unbalanced RCA main inputs Left and right, balanced ¼” TRS and unbalanced RCA outputs
Technical Specifications
Inputs |
|
---|---|
2- Balanced ¼” TRS 2- Unbalanced RCA |
Outputs |
|
---|---|
2- Balanced ¼” TRS (full range with 80 Hz HPF option 2- Unbalanced RCA (full range with 80 Hz HPF option) |
Performance |
|
---|---|
Frequency Response | 30 Hz – 200 Hz |
Low Pass Filter Frequency | 50 – 130 Hz (variable) |
Signal-to-Noise Ratio | >98 dB (A weighted) |
THD | 0.05% |
Amplifier Power | 200W peak, 100W RMS |
Power Consumption | 120W |
Amplifier Type | Class AB |
Peak SPL at 1m | 104 dB |
Woofer | 8” glass-composite, downward-firing |
Acoustic Port | Front-firing bass reflex (round) |
User Controls |
|
---|---|
Input Gain Range | -30 to +6 dB |
Polarity Switch | 0° or 180° |
Low Pass Filter Control | 50 Hz to 130 Hz |
High Pass Filter Switch | On/Off |
Protection |
|
---|---|
RF interference Output-current limiting Over-temperature Turn-on/off transient Subsonic filter External mains fuse |
Power |
|
---|---|
100-120V ~50/60 Hz or 220-240V ~50/60 Hz |
Cabinet |
|
---|---|
Vinyl-laminated MDF |
Physical |
|
---|---|
Width | 10.2” (260 mm) |
Depth | 12.6” (320 mm) |
Height | 11” (280 mm) |
Weight | 21.2 lbs (9.6 kg) |